ZiLOG Z8F64xx Timer Calculator

Sample code generator for ZiLOG's Z8F64xx Z8 Encore family of 8-bit Flash MCU's. Tested only with ZDSII v4.11 (C compiler-v3.60) on Z8F6423 running at 20MHz crystal. It's expected to work also with other parts, like Z8F6421 of e-Gizmo's IRC Slimboard. It generates sample codes of "timer interrupt" and "pulse width modulation(pwm)" for TIMER0, TIMER1, TIMER2, and TIMER3 peripherals. Please refer to the datasheet("part selection guide" table) of this family to see what timer peripherals are available on a particular part.

-----------------------------------------------------------------

Timer Interrupt Code Generator

System Clock Frequency:		Hz
Select Timer Peripheral:	TIMER0TIMER1TIMER2TIMER3
Desired Interrupt Rate:		Hz

-----------------------------------------------------------------

PWM Code Generator

System Clock Frequency:		Hz
Select Timer Peripheral:	TIMER0TIMER1TIMER2TIMER3
Desired PWM Frequency:		Hz
Initial PWM Duty Cycle:		%

-----------------------------------------------------------------

note: I'm a newcomer to javascript. Please notify me of found "bugs" in these code makers.

-----------------------------------------------------------------

Bluetooth Controlled Mobot

Bluetooth Controlled Mobot using Z8F0823 and LMX9838.

It's supposed to be my entry for a friendly competitions of "sumobots". But, I wasn't able to make it "autonomous" on time for the event. It only have four sensors on each corner to detect "black" lines, but no sensor for detecting an opponent. And so that I can still test the hardware, I just made it manually controllable by using my phone's bluetooth. The bluetooth module is the same circuit I used in my BT minibot . I also used the same python S60 script for my N6120c (Symbian phone) controller.

forum link: Filipino Version of Robot Wars

Mini-STM32 WAVE Audio Player

Mini-STM32 SD/MMC WAV (RIFF-WAVE-LPCM format) Audio Player with Spectrum Display

Simple SD Audio Player with an 8-pin IC by ChaN

DSP (FFT) libraries for Cortex M3 by Ivan Mellen

CooCox CoOS real-time multi-task OS

minimal hardware modification:

demo video:


Project files: Mini-STM32 WAVE Audio Player.rar

forum link: Mini-STM32 board

PIC18F SD WAV Audio Player

As inspired by Simple SD Audio Player by ChaN, this project uses Microchip's PIC18F2550 to read RIFF WAVE files, and display some file information on the N6610 LCD; And then it will play the audio itself through PIC's PWM with a simple RC filter on the output pin. The hardware actually comes from my previous project, and I just attached a ready-made audio amp (w/ speaker) for the demo.
Schematic:
Due to PIC's peripheral limitations, I only set the PWM frequency to 187.5kHz and not the 250kHz carrier frequency originally used by ChaN, because it's the maximum PWM frequency than can still get an 8-bit resolution of the duty cycles (=48MHz/256). It is also possible to use R-2R ladder in stead of (low-pass) filtering the PWM output since there still enough unused digital output pins for this approach.
On the software part, I wasn't able to make a good data buffering as good as what ChaN did. It's noticeable with WAVE files with higher bit-rates (=SampleRate*NumChannels*BitsPerSample). Nevertheless, it can still support up to 48kHz sampling rate, but with only Mono channel and 8-bits/sample resolution.

demo video:


Source code(PICC-18) with and without LCD: PIC18 SD WAV Audio Player

My on-going project: currently porting the code to STM32F103RB for additional features.

Some useful software (shareware) tools:
TextAloud - Text to Speech software
Switch Sound File Converter-multi format audio file converters

PIC SD BMP Reader II

It is similar to my first PIC SD BMP Reader , and almost the same circuit except for the LCD. This time I now use a Nokia 6610 LCD. The LCD is capable of displaying 4096 colors, but for code simplicity I just operate it at 8-bit (256 colors) resolution.

Diagram:
This project is capable of reading bitmap file using common format (24-bit per pixel), with size (width and height) equal to or less than 132 pixels at both side.

demo video:



Source code + diagram: PIC18 SD BMP Reader 2.rar


similar project at Hack-a-day: How-to: Digital picture frame, 100% DIY
-it uses PIC24FJ64 in stead of pic18f2550

PIC18 SD BMP Reader

This project uses Microchip's PIC18F2550 and Nokia 3310 LCD to read and display images from BMP files on the SD/MMC cards. Although the display itself is monochrome, it still supports 24-bpp (bits per pixel), 8-bpp, 4-bpp, and 1-bpp (monochrome) Bitmap files (*.BMP) with size of 84x48 pixels. It uses the Petit FAT File System Module by ChaN.

Diagram and simulation:
Actual circuit:


Demo video:


forum link: Petit FAT File System (w/ Proteus ISIS simulation)

Source code(PICC18) + simulation(ISIS) + others: PIC18 SD BMP Reader.rar

references for BMP file format:
Wiki BMP file format
atlc.sourceforge bmp format
MSDN Types of Bitmaps

Mini-STM32 Digital Picture Frame

The original source code for this project is copied from Martin Thomas' Simple STM32 Digital Picture Frame

The application reads picture-files in standard Windows BMP-format from a SD-Card and shows them on a 2.8" color-LCD-module (320*240 px).

The application also uses the FAT File System Module by Chan, on which M. Thomas ported to work on STM32 SPI interface. Additional information about this project can be found on the link above.


Some of the minor modifications I made were:

• I've modified the LCD driver so that it will work on my unit. My unit got the ILI9320 LCD controller.
  
• I didn't utilize the USART interface (but this can be easily enabled in the code). In stead of sending the "information" through this interface , some of them are being displayed on the LCD itself (e.g. bitmap filenames).
  
• I've enabled the two push-buttons on the board. The first one toggles between "Play" and "Pause"; and the other one is to "Restart" the "slide-show" from the beginning.
  

demo video:


Modified Source Code (Keil RVMDK + uVision 4): Digital Picture Frame.rar